Skip to main content
Skip table of contents

3-1 How to pair i3ALLSYNC HDMI/USB-C transmitter for the first time

When you use the i3ALLSYNC HDMI/Type-C transmitter for the first time, you have to do a short pairing process before you can start screen sharing. Be aware that the pairing process only has to be done once. After this process, you can simply connect the HDMI/Type-C transmitter to your laptop, press the main button, and your screen will be mirrored.

There are two ways to pair your i3ALLSYNC HDMI/USB-C transmitter.

Wireless pairing:

  1. Plug your i3ALLSYNC HDMI/USB-C transmitter into your laptop.

  2. Activate your i3ALLSYNC app on your i3TOUCH, i3HUDDLE, or i3SIXTY:

  3. Open the “Settings” menu in the lower right corner. Choose the option “Pair dongle”.

  4. Follow the indicated steps on your screen to finish the paring process.

After this procedure, the auto-pairing is complete. Wait for a constant green light, then press the main button and your screen will be mirrored.

Wired pairing:

  1. Plug your i3ALLSYNC HDMI/USB-C transmitter into your i3TOUCH, i3HUDDLE, or i3SIXTY.

  2. Activate your i3ALLSYNC app on your i3TOUCH, i3HUDDLE, or i3SIXTY:

  3. Open the “Settings” menu in the lower right corner. Choose the option “Pair dongle”.

  4. Follow the indicated steps on your screen to finish the paring process.

Unique Pairing Record

i3ALLSYNC HDMI/USB C Transmitter uses the i3TOUCH DEVICE NAME as the pairing record. Please make sure all your i3TOUCH devices have a unique DEVICE NAME.

The DEVICE NAME setting can be found in the device setting menu.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.