Usage Notice

Usage Notice

Safety Information

	The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
	The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Important Safety Instruction

1. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from over heating, it is recommended to install the projector in a location that does not block ventilation. As an example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or a cabinet that restricts air flow.

2. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock, do not expose the projector to rain or moisture.

3. Do not install near heat sources such as radiators, heaters, stoves or any

4. other apparatus such as amplifiers that emits heat.

5. Clean only with dry cloth.

6. Only use attachments/accessories specified by the manufacturer.

   1. Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be (but not limited to):

   2. Unit has been dropped.

   3. Power supply cord or plug has been damaged.

   4. Liquid has been spilled on to the projector.

   5. Projector has been exposed to rain or moisture.

   6. Something has fallen in the projector or something is loose inside.

   7. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards.

7. Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short out parts that could result in fire or electric shock.

8. See projector enclosure for safety related markings.

9. The unit should only be repaired by appropriate service personnel.

Precautions

Please follow all warnings, precautions and maintenance as recommended in this user's guide.

■ Warning - Do not look into the projector’s lens when the light source is on. The bright light may hurt and damage your eyes.

■ Warning - To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture.

■ Warning - Please do not open or disassemble the projector as this may cause electric shock.

■ Warning - When switching the projector off, please ensure the cooling cycle has been completed before disconnecting power. Allow 90 seconds for the projector to cool down.

Do:

• Turn off and unplug the power plug from the AC outlet before cleaning the product.

• Use a soft dry cloth with mild detergent to clean the display housing.

• Disconnect the power plug from AC outlet if the product is not being used for a long period of time.

Do not:

• Block the slots and openings on the unit provided for ventilation.

• Use abrasive cleaners, waxes or solvents to clean the unit.

• Use under the following conditions:

  • In extremely hot, cold or humid environments.

    • Sea level to 5000 feet
      Extremely hot: > 35°C
      Extremely cool: < 5°C

    • 5000 feet above
      Extremely hot: > 30°C
      Extremely cool: < 5°C

    • Extremely humid: > 70% R.H. (Relative Humidity)

• In areas susceptible to excessive dust and dirt.

• Near any appliance generating a strong magnetic field.

• In direct sunlight.