Description of functions
TX46-C USB-C transmitter:
Buttons
LED
LED | Behavior | Definitions |
|---|---|---|
Green | Lights up constantly | TX46-C finds Receiver successfully. |
Blinks | TX46-C connects to router successfully but can't find Receiver. | |
Blue | Lights up constantly | TX46-C is presenting (You can see the mirroring on the i3TOUCH.) |
Blinks 3 times and return to green light | Receiver enabled Moderator mode, so TX46-C cannot present proactively. | |
Yellow | Lights up constantly | TX46-C is booting up. |
Blinks | TX46-C is connecting to Receiver, but TX46-C detects no USB-in signal. | |
Purple | Blinks constantly | TX46-C is processing firmware update. (Note. Do not remove the power during firmware update.) |
Blinks 5 times | TX46-C is deleting the pairing record. | |
White | Blinks | TX46-C is under pairing process. |
Red | Blinks 1 time and stops 3 seconds (loop) | TX46-C has no Receiver pairing data (Normally happens when first use or the pairing record has been deleted.) |
Blinks 3 time and stops 3 seconds (loop) | TX46-C cannot find the designated network SSID. | |
Blinks 5 time and stops 3 seconds (loop) | TX46-C is able to find the designated network SSID, but the stored password is wrong. |
TX45-C USB-C transmitter:
Buttons
LED
LED | Behavior | Definitions |
|---|---|---|
Green | Lights up constantly | TX45-C finds Receiver successfully. |
Blinks | TX45-C connects to router successfully but can't find Receiver. | |
Blue | Lights up constantly | TX45-C is presenting (You can see the mirroring on the i3TOUCH.) |
Yellow | Blinks | TX45-C is connecting to Receiver, but TX45-C detects no USB-in signal. |
Purple | Blinks constantly | TX45-C is processing firmware update. (Note. Do not remove the power during firmware update.) |
Blinks 5 times | TX45-C is deleting the pairing record. | |
White | Blinks | TX45-C is under pairing process. |
Red | Blinks 1 time and stops 3 seconds (loop) | TX45-C has no Receiver pairing data (Normally happens when first use or the pairing record has been deleted.) |
Blinks 3 time and stops 3 seconds (loop) | TX45-C cannot find the designated network SSID. | |
Blinks 5 time and stops 3 seconds (loop) | TX45-C is able to find the designated network SSID, but the stored password is wrong. |
TX45-H HDMI transmitter:
Buttons
LED
LED | Behavior | Definitions |
|---|---|---|
Green | Lights up constantly | TX45-H finds Receiver successfully. |
Blinks | TX45-H connects to router successfully but can't find Receiver. | |
Blue | Lights up constantly | TX45-H is presenting (You can see the mirroring on the i3TOUCH.) |
Yellow | Blinks | TX45-H is connecting to Receiver, but TX45-H detects no HDMI signal. |
Purple | Blinks constantly | TX45-H is processing firmware update. (Note. Do not remove the power during firmware update.) |
Blinks 5 times | TX45-H is deleting the pairing record. | |
White | Blinks | TX45-H is under pairing process. |
Red | Blinks 1 time and stops 3 seconds (loop) | TX45-H has no Receiver pairing data (Normally happens when first use or the pairing record has been deleted.) |
Blinks 3 time and stops 3 seconds (loop) | TX45-H cannot find the designated network SSID. | |
Blinks 5 time and stops 3 seconds (loop) | TX45-H is able to find the designated network SSID, but the stored password is wrong. |