Turning On/Off
Turning On/Off
Power On.
Step 1
Use AC power (100V~240V, 50Hz/60Hz) as the machine power source. Make sure the power plug fully
inserted and that the ground wire of the outlet is properly connected.
Step 2
Turn on the rocker switch (on the rear side of the machine, next to the power socket) after a power source has been connected. The power indicator should be red.inserted and that the ground wire of the outlet is properly connected.
Step 3
Press the Power button on the display or the power button on the remote control to start the machine.
The indicator light turns green.
Power Off.
Step 1
Press the Power button on the remote control or long press the Power button to turn the machine power off. The indicator light turns red.
Step 2
If you want to completely turn off the machine, turn off the rocker switch on the rear of the machine (next to the power socket) and unplug the power cord.
When the machine enters sleep mode or is turned off, the system will first detect whether the built-in computer is turned off. If not, it first turns off the computer and then enters the sleep mode or shutdown.
Please shut down the machine before disconnecting the power source, or it may damage the machine. Accidental power failure may damage to the machine.
Do not repeatedly turn the power on & off in a short period of time as it may cause malfunction.
Indicator Status.
Indicator | Machine Status |
Off | Shut down or power disconnected |
Red | Shut down |
Green | Normal working state |
When the machine is turned on, short press the power button to enter sleep mode; short press the power button again, or press any button on the remote control or tap the screen twice to wake up the screen.
When the machine is turned on, hold the screen for more than 3 seconds with 3 fingers to turn screen off; short press the power button, or press any button on the remote control or tap the screen to turn screen on.