Skip to main content
Skip table of contents




  • Auto: When HDMI1.4 3D timing identification signal is detected, the 3D image is selected automatically.

  • Choose  “Off”  to  disable  3D function.

  • Choose  “On”  to  enable  3D function.

3D Tech.

Use this option to select 3D technology.

  • DLP-Link: Select to use optimized settings for DLP 3D Glasses.

  • 3D Sync: Select to use optimized settings for IR, RF or polarized 3D Glasses.

3D Invert

Use this option to enable/disable the 3D invert function.

3D Format

Use this feature to select the 3D format. Options are: “Frame Packing”, “Side-by-Side (Half)”, “Top and Bottom”, “Frame Sequential” and “Field Sequential”.

1080p @24

Use this feature to select 96 or 144Hz refresh rate as using 3D glasses in the1080p @ 24 frame packing.

“Frame Sequential” is supported the DLP Link 3D input signals from VGA / HDMI connector.

“Frame Sequential” / “Field Sequential” are supported the HQFS 3D input signals from Composite/ Svideo connector.

“Frame Packing” / “Side-by-Side(Half)” / “Top and Bottom” are supported from HDMI 1.4a 3D input signals.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.