Turning On/Off
Power On.
Step 1
Use AC power (100V~240V, 50Hz/60Hz) as the machine power source. Make sure the power plug fully
inserted and that the ground wire of the outlet is properly connected.
Step 2
Turn on the rocker switch (on the rear side of the machine, next to the power socket) after a power source has been connected. The power indicator should be red.inserted and that the ground wire of the outlet is properly connected.
Step 3
Press the Power button on the display or the power button on the remote control to start the machine.
The indicator light turns green.
Power Off.
Step 1
Press the Power button on the remote control or long press the Power button to turn the machine power off. The indicator light turns red.
Step 2
If you want to completely turn off the machine, turn off the rocker switch on the rear of the machine (next to the power socket) and unplug the power cord.
-
When the machine enters sleep mode or is turned off, the system will first detect whether the built-in computer is turned off. If not, it first turns off the computer and then enters the sleep mode or shutdown.
-
Please shut down the machine before disconnecting the power source, or it may damage the machine. Accidental power failure may damage to the machine.
-
Do not repeatedly turn the power on & off in a short period of time as it may cause malfunction.
Indicator Status.
|
Indicator |
Machine Status |
|
Off |
Shut down or power disconnected |
|
Red |
Shut down |
|
Green |
Normal working state |
-
When the machine is turned on, short press the power button to enter sleep mode; short press the power button again, or press any button on the remote control or tap the screen twice to wake up the screen.
-
When the machine is turned on, hold the screen for more than 3 seconds with 3 fingers to turn screen off; short press the power button, or press any button on the remote control or tap the screen to turn screen on.